[Shop-talk] residentual wiring question

David Scheidt dmscheidt at gmail.com
Tue Jun 2 14:46:15 MDT 2009


On Tue, Jun 2, 2009 at 1:18 PM, Rich White <rlwhitetr3b at hotmail.com> wrote:
> I'm working with wiring in an older building. B Some of the outlets do not
have
> a grounding, bare/green, wire in the box.
> I want to provide the user with an outlet which will accept a three prong
> plug.
>
> As I remember NEC from about twenty years ago...
> if I put a GFCI outlet as the first outlet in the circuit, I can use ground
> outlet in the rest of the circuit even though there isn't a grounding wire.
>
> Is this still the case?
>

Some places.  You have to label the outlets "NO EQUIPMENT GROUND" and
"GFCI protected".  (I've never seen any labeled, until a couple months
ago, when an inspector pointed this out (and refused to sign off on)
in a building a client uses.)  It's more complicated than this, I
think, too.  (It may be that if you're providing ground plugs other
than at the GFCI, you need ground between the GFCI and the new plugs)
Check your local code!

>



--
David Scheidt
dmscheidt at gmail.com


More information about the Shop-talk mailing list