[Shop-talk] Compressor repair

[Battmain]

Some motors also have a cct breaker in the case.
(in addition to the pressure
switch located away 
from the actual motor. )  Assume you've also 
checked the
obvious and the cct is capable of
handling the compressor and the cct breaker
for
the outlet hasn't tripped. (even if you have been
using that outlet
before. Hint-Try the washing
machine 30amp cct. )

Brian
battmain at yahoo.com
----- Original Message ----
From: William M. Gilroy <wmgilroy at gmail.com>
To:
Shop Talk <shop-talk at autox.team.net>
Sent: Tuesday, November 4, 2008 3:07:40
AM
Subject: [Shop-talk] Compressor repair

My small single stage Campbell
Hausfeld stopped working tonight just as
I was going to sand down a shelf for
my wife.  I apply power to the
compressor and nothing happens.  Turn it off
and back on at the
pressure/on/off switch and nothing.  Not a sound.  I figure
the pressure
switch is broken but I was wondering if anyone has an insight in
troubleshooting this thing.  If not I will have a whack at it tomorrow
night.
Thanks,

Bill
_______________________________________________
Support
Team.Net  http://www.team.net/donate.html

You are subscribed as
battmain at yahoo.com

Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive