[Shop-talk] breaker tripping on compressor
Phil Nase
bugi1960 at gmail.com
Fri May 16 09:54:53 MDT 2008
I think I will replace it. Come to think of it the circuit for my
garage heat was doing the same thing years ago and a new breaker fixed
it.
The breaker itself isn't even 5 years old.
Thanks everyone for the help.
Phil Nase
On May 16, 2008, at 11:49 AM, Doug Braun wrote:
> Maybe the breaker for that line is old and tired?
> If possible, you should measure the current draw of
> the compressor (e.g. with a clamp-on meter) and see
> how it compares to the rated capacity of the circuit.
>
> My air compressor trips its breaker a few times a
> year, which I can put up with. Unfortunately I have
> an older breaker panel that uses expensive and
> hard-to-replace breakers. If I had a modern,
> common-type panel with plug-in breakers, I would
> simply spend the $10-15 to get a brand new breaker,
> and spend a few minutes installing it, even if I
> wasn't 100% certain the breaker was bad.
>
> Doug
>
>
> --- Philip Nase <bugi1960 at gmail.com> wrote:
>
>> I have a 220 line for my garage compressor. It's
>> worked fine for
>> years. Just this week when the pressure builds to
>> shut off pressure
>> it's tripping the breaker.
>>
>> Any ideas what to look for?
>>
>> Thanks.
>>
>> Phil Nase
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> You are subscribed as doug at dougbraun.com
>>
>> Shop-talk mailing list
>>
>> http://autox.team.net/mailman/listinfo/shop-talk
>>
>> http://www.team.net/archive
More information about the Shop-talk
mailing list