[Shop-talk] hole sawed 1/4" thick steel post undersized

[Eric J Russell]

Can you put an access hole in the back side and then put a cover plate 
over that?

Eric Russell
STOC #2860
Mebane, NC
http://home.mebtel.net/~ejrussell

----- Original Message ----- 
>
> Well it is big enough for the switch, but not the nut that holds it 
> in (they
> were assuming access to the back of he plate, but this is a blind 
> location). I
> have a face plate that will hold it to the post.