[Oletrucks] Starting problem

Bill Hanlon bill_hanlon at comcast.net
Tue Dec 19 06:57:53 MST 2023


Smokey, you didn't say if you have an original "stomp" starter or a newer
style  starter that operates with a key.

On Mon, Dec 18, 2023, 9:17 PM Fred Juch <fjuch at austin.rr.com> wrote:

> Smokey,
>
> There is a pin/switch on the starter that puts 12 volts on the coil while
> the starter is engaged. When you let off the mechanical starter the voltage
> to the coil goes through the resistor on the firewall (maybe 9 or 10
> volts). Maybe this is the issue somehow. You can out a jumper from the
> +batter to the coil to see if it runs that way.
>
>
>
> Fred Juch
>
> Round Rock, TX
>
>
>
> *From:* Oletrucks [mailto:oletrucks-bounces at autox.team.net] *On Behalf Of
> *smokey
> *Sent:* Monday, December 18, 2023 4:38 PM
> *To:* oletrucks
> *Subject:* [Oletrucks] Starting problem
>
>
>
> Hey guys, on my 235, I just replaced the starter and for some reason I get
> no fire to start the engine.  There is a 2 post terminal on the firewall
> with one wire to the starter and one is not connected to anything.  Could
> the loose wire be a factor?
>
> Thanks!
>
>
>
>
> _______________________________________________
>
> Oletrucks at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/pipermail/oletrucks
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/oletrucks/bill_hanlon@comcast.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/oletrucks/attachments/20231219/708dd370/attachment.htm>


More information about the Oletrucks mailing list