[Oletrucks] DIVISION BAR LINER GLUE?

[rswanson]

Chuck,
     I have a 55 Cameo 1/2 ton and I need to do the same job,  If anyone
knows of a good place to buy the material, I would appreciate it if you
could pass on this information as well.
Bob



On 2016-04-25 05:52 AM, Chuck Smith wrote:
> About 20 years ago I replaced the Vertical Division Bar Channel Felt 
> Liners in my 57 3100.  The felt liner strip is glued into the U shaped 
> channel that cushions the front of the sliding door window.  I spread 
> the glue on the inside of the division bar and pressed the liner into 
> the U shaped recess with a piece of plywood - the process went well 
> but they have finally worn out.
>
> So it is time to do it again but I've forgotten (old age is cruel) 
> what glue I used.  I think that I remember applying it with a brush 
> attached to the bottle cap - it may have been rubber cement.
>
> Can anyone report on their experiences with this repair and what glue 
> they used?
>
> Best regards,
>
> Chuck
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/oletrucks/attachments/20160425/293a4be9/attachment.html>