[Oletrucks] Two basic questions

[Harry Spencer]

I've already got a Mustang IFS installed with the standard Chevy five bolt
pattern and want the rear to match. I haven't learned anyway to convert the
stock six lug rear end to five lug. I'd certainly consider keeping the stock
rear if that was possible. Harry





-----Original Message-----
From: GALE GORMAN [mailto:gale_gorman at me.com] 
Sent: Sunday, November 01, 2015 5:14 AM
To: Harry Spencer
Cc: Oletrucks list
Subject: Re: [Oletrucks] Two basic questions

Why change the rear end?

Gale Gorman
Houston
’54 3100
’67 C20

On Oct 31, 2015, at 10:14 PM, Harry Spencer <spencer-h at sbcglobal.net> wrote:

Hello All. I’m thinking many of you know these answers off the top of your
heads. My 1955 First series Chevy is finally ready for an engine, tranny and
rearend.
 
I’ve got a 350 out of an 1985 Suburban but need a trans. I want a 700 R4.
>From what I’ve read, the best years are 1987 to 1992. I’m trying to avoid
all the computerization. Any thoughts and suggestions?
 
What is the ideal width for a rearend? I’m looking at a 2000 Camaro 10 bolt
that is 65 and ½ wide.
 
I’m building this on a budget of course. Think driver, not horsepower.
 
Thanks.
Harry
1955 First Series
 
 
 
 
 
 
 
_______________________________________________

Oletrucks at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/oletrucks/gale_gorman@mac.com