[Oletrucks] GMC vs Chevy TF fender question

[Rrogers57]

I can handle drilling a few holes. Just didn't want to get into any  
major slicing and dicing.

Thanks Jim!

Sent from my iPhone

On May 6, 2010, at 2:26 PM, "Jim Krontz" <jim_krontz at yahoo.com> wrote:

> I have a 57 3100 and purchased a 56 GMC as a donor truck.  The front  
> fenders
> lined up pretty good.  You will have to do a little modification  
> (drill a
> few holes for the grill), but not too difficult.
>
> Picked up the GMC because the cab was in MUCH better shape than the  
> 57s, and
> then I had the added benefit of striping all the parts I needed.  
> Then sold
> the 56 to another guy for about half of my cost.  All in all, I was  
> out
> about $700, but picked up the cab, two front fenders, and two rear
> fenders...
>
> Good luck
>
> Jim
> 57 3100
> Mesa, AZ
>
> -----Original Message-----
> From: oletrucks-bounces at autox.team.net
> [mailto:oletrucks-bounces at autox.team.net] On Behalf Of Rob
> Sent: Thursday, May 06, 2010 11:06 AM
> To: oletrucks at autox.team.net
> Subject: [Oletrucks] GMC vs Chevy TF fender question
>
> I need some input on the differences between GMC and Chevy Task  
> Force front
> fenders.  Is there any real difference?  Can you install a Chevy  
> grill,
> specifically a '57?   I have been offered a '57 GMC 1/2 ton long bed
> factory
> V8 truck for $1000 and would love to pull the GMC bumper/grill and  
> dress it
> as
> a '57 Chevy.  Is it as simple as just installing the Chevy grill?
>
> Thanks,
>
> Robert
> _______________________________________________
>
> Oletrucks at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/oletrucks/jim_krontz@yahoo.com