[Oletrucks] GMC vs Chevy TF fender question

[Jim Krontz]

I have a 57 3100 and purchased a 56 GMC as a donor truck.  The front fenders
lined up pretty good.  You will have to do a little modification (drill a
few holes for the grill), but not too difficult.

Picked up the GMC because the cab was in MUCH better shape than the 57s, and
then I had the added benefit of striping all the parts I needed. Then sold
the 56 to another guy for about half of my cost.  All in all, I was out
about $700, but picked up the cab, two front fenders, and two rear
fenders...

Good luck

Jim
57 3100 
Mesa, AZ

-----Original Message-----
From: oletrucks-bounces at autox.team.net
[mailto:oletrucks-bounces at autox.team.net] On Behalf Of Rob
Sent: Thursday, May 06, 2010 11:06 AM
To: oletrucks at autox.team.net
Subject: [Oletrucks] GMC vs Chevy TF fender question

I need some input on the differences between GMC and Chevy Task Force front
fenders.  Is there any real difference?  Can you install a Chevy grill,
specifically a '57?   I have been offered a '57 GMC 1/2 ton long bed
factory
V8 truck for $1000 and would love to pull the GMC bumper/grill and dress it
as
a '57 Chevy.  Is it as simple as just installing the Chevy grill?

Thanks,

Robert
_______________________________________________

Oletrucks at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/oletrucks/jim_krontz@yahoo.com