[Oletrucks] filler here?

[james hays]

Tom: The bad thing about filler on a outside corner is it could get chipped 
off with a sharp blow to the corner - also bondo should be less than 1/8" to 
prevent possible future cracking. Could weld a bead on the outside corner - 
grind to correct gap size & use filler for the remainder assuring corner 
protection.

I would weld now that only in primer than take a chance after final paint.

Jim


----- Original Message ----- 
From: "Tom Cooper" <cooptnt at att.net>
To: <oletrucks at autox.team.net>
Sent: Sunday, October 11, 2009 8:56 AM
Subject: [Oletrucks] filler here?


> Will filler work here if I scuff it up good with 36 grit? I put on a cab
> corner and something happened between welding and grinding to give me more
> of a gap than I need. I know welding something in would be best, but would
> filler work? After all my welding and grinding got me to this point 
> hehehe
> Thanks for the help.Tom
>
> http://www.coopscorner.com/misc/doorgap.htm