[Nobbc] THANKSGIVING RIDE

[rlmossholder at comcast.net]

Greg,

I will have to look at my notes for the specs on the carb. I ordered all of
the parts through Pierce Manifolds. They asked me for all of the specs on the
engine rebuild and punched those numbers in to their computer and it spit out
the proper part #'s. When I rebuilt the carb, all the parts fit fine and the
engine fired right up. We ran it in through various RPM's with no load and
after a little tweaking it performed beautifully. I think if I were to use
multiple carbs I would go with a set from PRI Race. Chris Cancelli has
developed a set of 4 motorcycle carbs and a manifold as a kit for the
Spitfire. I used his full coil over suspension kit (front and rear) on my car.
Really nice kit, got rid of the transverse leaf spring and hopefully all of
the handling problems that it caused. I was pressed for time and he hand
delivered the suspension parts to my Dad's shop in Crescent City! Now that's
what I call service! He also makes parts for Alfa Romeos. Here's their
website: www.prirace.com

Cheers,
Rich