[Morris] Throwout bearings redux
David Kernberger
dkern at napanet.net
Sat Mar 3 12:39:43 MST 2012
For what it is worth, I too have tried to sort out the
identification and dimensions of 948, 1098, and 1275 throwout
bearings and have found that nobody seems to know anything very
specific. I even once ordered new specimens of the 3 types so I
would have them for comparison---and when I did I found the results
still unclear. The clutches and flywheels themselves, as well as the
rear engine plates, are very different also. It seems like somebody
ought to be able to answer the question. How about it? Anybody else
have helpful information?
Cheers,
David Kernberger
-------------------------------------------------------------------------
>It's silly to disparage certain cars vs others of the same make.
>Any old car is a good car, in my opinion.
>
>Mike
>--------------------------------------------------
>From: <monster at caverock.net.nz>
>Sent: Saturday, March 03, 2012 3:25 AM
>To: <Morris at autox.team.net>
>Subject: Re: [Morris] Throwout bearings redux
>
>>I agree that there are not many Morris forums around the web, and the ones
>>that are there are often for one model only.
>>Possibly this is the same for most actual car clubs.
>>I am a member of the Morris Owners' Club (South Island) here in NZ, and it
>>is for any Morris ever built, including commercials, trucks, vans, from
>>1913 to 1984. I like the inclusiveness of this club.
>>http://www.mocsi.org.nz/
>>
>>I've been hanging out on the Wolseley forum. They are friendly and
>>accomodating and I've been thinking about how nice it would be to have a
>>Morris equivalent of this forum; somewhere that would cater for *all*
>>morris vehicles.
>>http://www.wolseleyforum.com/
>>
>>I've looked at the MMOC forum but it (or some members at least) seem
>>highly disparaging towards any other model of Morris except Minors, which I
>>thought was a pity.
>>
>>regards,
>>--
>>Robert
>>
>>
>>On Fri, 2 Mar 2012 10:05:48 -0800 (PST), <uniquelittlecars at yahoo.com>
>>wrote:
>>>B
>>>I wish there were more active Morris groups.
>>>If your looking for an active group.
>>>There is some people from your country
>>>And a couple of other owners of Oxfords.
>>>Besides the MMOC we are the only active group on the internet is
>>>morris_motors on yahoo..
>>>B
>>>http://autos.groups.yahoo.com/group/morris_motors/
>>>B
>>>Unless you know ofB others I would like to hear about them..
>>_______________________________________________
>>
>>Morris at autox.team.net
>>Donate: http://www.team.net/donate.html
>>Suggested annual donation $11.47
>>Archive: http://www.team.net/archive
>>Forums: http://www.team.net/forums
>>Unsubscribe/Manage:
>>http://autox.team.net/mailman/options/morris/mmarr@notwires.com
>_______________________________________________
>
>Morris at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation $11.47
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/morris/dkern@napanet.net
More information about the Morris
mailing list