[Mini] Mini MOT retest.....

[Richard Porter]

On 27 Sep 2017 Dr John C Bullas  wrote:

> After doing all the wheel nuts up and replacing a rear cylinder (cylinder
> removed replaced and bled in 15 minutes, 20  minutes to fit the f***ing
> lock washer),

You can get a special tool for putting the circlip on but I improvise 
with a socket, a stud that screws into the cylinder, a nut at the 
other end and washers as required. You need to loosen the hydraulic 
pipe at the other end and swing it out of the way. The socket forces 
the circlip over the slave cylinder inlet.

-- 
Richard Porter                      http://www.minijem.plus.com/
t: @westernexplorer                 mailto:ricp at minijem.plus.com
I don't want a "user experience" - I just want stuff that works.