[Mgs] Early MGA rear brake

[Barney Gaylord]

That straight banjo fitting should have 3/8-BSP threads in the top 
end to accept the pipe flare nut, and 3/8-24-UNF threads in the 
bottom end to accept the bleed nipple.  Pipe at top and bleeder at 
bottom, no other way it can fit.

Later cars had an "L" shape banjo fitting with 3/8-24-UNF threads on both ends.
See here:
http://mgaguru.com/mgtech/hydraulics/ht112.htm
http://mgaguru.com/mgtech/parts/27H/27H7164.htm
http://mgaguru.com/mgtech/parts/AHH/AHH5634.htm


At 05:34 PM 7/26/2023, dave northrup wrote:
>Is this correct or does the bleed valve go on the other end or does 
>it matter?
>....
>Attachment: 20230726_172433.jpg


-- 
This email has been checked for viruses by AVG antivirus software.
www.avg.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20230727/e42ad9c2/attachment.htm>