[Mgs] bleed screws

[Max Heim]

I am pretty sure there would be no factory metric parts on the MGA. But there is information about this online. Barney Gaylord’s site probably has what you need.

--
Max Heim
'66 MGB

> On Jan 29, 2021, at 9:12 AM, dave <dave at ranteer.com> wrote:
> 
> I have a 56 mga, and the wrench that fits the bleed screws for the brake cylinders (drums all around) are whitworth.  And the thread doesn’t match either metric or SAE on my thread checker so I am assuming that is also metric.
>  
> Not knowing the true history or this car I am assuming that it came that way.  But I also realize that maybe someone grabbed the brake cylinders off a TD or even a TC and used those.
>  
> Is there any corroborating evidence out there one way or the other?
>  
> It seems original in many ways; has a lot of the weird stuff the early cars came with if that is any help.
> _______________________________________________
> 
> Mgs at autox.team.net <mailto:Mgs at autox.team.net>
> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs <http://www.team.net/pipermail/mgs> http://autox.team.net/archive <http://autox.team.net/archive>
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net <http://autox.team.net/mailman/options/mgs/mvheim@sonic.net>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20210129/15cc8509/attachment.htm>