[Mgs] Driveshaft orientation

[Robert's New iPad]

   The sliding joint (sleeve & spline) end is forward, toward the gearbox.
    As the driveshaft may have been separated at the sliding joint (they will pull apart when off the car), check that the yokes of the universal joints are aligned.
Bob


> On Aug 25, 2021, at 3:29 PM, <jimray at hartcom.net> <jimray at hartcom.net> wrote:
> 
> Can anyone give me the correct orientation (front to back) of the driveshaft on an 80 MGB. Does the end with the sleeve and spline connect to the differential or the transmission. I’ve seen examples of both configurations.
>  
> Thanks,
>  
> Jim Ray
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20210825/3045a6c3/attachment.htm>