[Mgs] Speed Bleeders

[Dan DiBiase]

Is there a technical or logical reason they are all different?

Dan D
'76B, '65B
Central NJ USA
http://dandibiase.cbintouch.com/


On Fri, May 22, 2020 at 10:42 AM Osborne, Paul via Mgs <mgs at autox.team.net>
wrote:

> It would have good if when they made them if all the same wrench size. It
> is a PIA, 3 diff. sizes.
>
> met 3 cents.
>
> paul o
>
> On May 21, 2020, at 4:11 PM, Robert's New iPad via Mgs <mgs at autox.team.net>
> wrote:
>
>   One kind lister recommended Speed Bleeders a couple of weeks ago, and I
> bought them for my MGB, SB 3824 for front brakes, SB 1428 for rear, and SB
> 71620 for the clutch.  It was time to change the hydraulic fluid, so seemed
> opportune to install these.
>   Thanks for the recommendation.  They made the job quick and neat.
>   Instructions are OK, but let me add that one should try to pinch the
> brake lines with ViceGrips to minimise loss of fluid, and pinch the clutch
> line even if you don’t do the others.   All three SBs were of different
> wrench size from original bleed screws.  Have wrenches ready for both sizes.
>   We had two cars to do, hence had two people. What the observer learned,
> watching from underneath, was that three pumps for each wheel will bring
> clear, clean fluid to both front and rear brakes.
>  $38 well spent.
> Bob
>
> _______________________________________________
>
> Mgs at autox.team.net
> Donate:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_donate.html&d=DwIGaQ&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=NQMpqgR66BkiR8_V5rZgdUaDFB_EbdXnCfW7UvjHigI&s=a0ss1K0s9IhEbq613f_pcHzUOwIbNa7yyLiIeXzBLz0&e=
> Suggested annual donation  $12.75
>
> Archive:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_pipermail_mgs&d=DwIGaQ&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=NQMpqgR66BkiR8_V5rZgdUaDFB_EbdXnCfW7UvjHigI&s=H2ERFEuCuaXabqZSEXOnpHJP-LgS8yJFXOKMzkpHotM&e=
>
> https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_archive&d=DwIGaQ&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=NQMpqgR66BkiR8_V5rZgdUaDFB_EbdXnCfW7UvjHigI&s=gJwTZioTu7LEVG-w8VjLI5itZ2vKNgh51FD9m8rLjEo&e=
>
> Unsubscribe:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_mailman_options_mgs_paul-40ece.rochester.edu&d=DwIGaQ&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=NQMpqgR66BkiR8_V5rZgdUaDFB_EbdXnCfW7UvjHigI&s=jixGBsTwSaX5JexavNOUUXgonF1EsAHyDzPFVWlo0kI&e=
>
>
> Paul Osborne
> Department of Electrical and Computer Eng
> University of Rochester
> 201 Hopeman Building RC
> Rochester NY 14627
>
>    585-275-5226
>
>
>
>
>
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200522/0ddb7a57/attachment.htm>