[Mgs] Speed Bleeders

Osborne, Paul paul at ece.rochester.edu
Fri May 22 08:34:36 MDT 2020


It would have good if when they made them if all the same wrench size. It is a PIA, 3 diff. sizes.

met 3 cents.

paul o

On May 21, 2020, at 4:11 PM, Robert's New iPad via Mgs <mgs at autox.team.net<mailto:mgs at autox.team.net>> wrote:

  One kind lister recommended Speed Bleeders a couple of weeks ago, and I bought them for my MGB, SB 3824 for front brakes, SB 1428 for rear, and SB 71620 for the clutch.  It was time to change the hydraulic fluid, so seemed opportune to install these.
  Thanks for the recommendation.  They made the job quick and neat.
  Instructions are OK, but let me add that one should try to pinch the brake lines with ViceGrips to minimise loss of fluid, and pinch the clutch line even if you don’t do the others.   All three SBs were of different wrench size from original bleed screws.  Have wrenches ready for both sizes.
  We had two cars to do, hence had two people. What the observer learned, watching from underneath, was that three pumps for each wheel will bring clear, clean fluid to both front and rear brakes.
 $38 well spent.
Bob

_______________________________________________

Mgs at autox.team.net<mailto:Mgs at autox.team.net>
Donate: https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_donate.html&d=DwIGaQ&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=NQMpqgR66BkiR8_V5rZgdUaDFB_EbdXnCfW7UvjHigI&s=a0ss1K0s9IhEbq613f_pcHzUOwIbNa7yyLiIeXzBLz0&e=
Suggested annual donation  $12.75

Archive: https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_pipermail_mgs&d=DwIGaQ&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=NQMpqgR66BkiR8_V5rZgdUaDFB_EbdXnCfW7UvjHigI&s=H2ERFEuCuaXabqZSEXOnpHJP-LgS8yJFXOKMzkpHotM&e=  https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_archive&d=DwIGaQ&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=NQMpqgR66BkiR8_V5rZgdUaDFB_EbdXnCfW7UvjHigI&s=gJwTZioTu7LEVG-w8VjLI5itZ2vKNgh51FD9m8rLjEo&e=

Unsubscribe: https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_mailman_options_mgs_paul-40ece.rochester.edu&d=DwIGaQ&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=NQMpqgR66BkiR8_V5rZgdUaDFB_EbdXnCfW7UvjHigI&s=jixGBsTwSaX5JexavNOUUXgonF1EsAHyDzPFVWlo0kI&e=

Paul Osborne
Department of Electrical and Computer Eng
University of Rochester
201 Hopeman Building RC
Rochester NY 14627
   585-275-5226





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200522/76335cc1/attachment.htm>


More information about the Mgs mailing list