[Mgs] simple question

Robert's New iPad mgbobh at gmail.com
Mon Aug 24 05:39:56 MDT 2020


  If the master cylinder has been full all along, then it would not have admitted air to clutch or to brake systems.
  If the clutch is not working properly, the problem is within the clutch system.  Check that the slave cylinder is not leaking. If it is, might as well rebuild or replace now. It it is not leaking, bleed the clutch line. 
   Clutches can often be difficult to bleed, using a lot of fluid in the process.  Keep a watch on the master cylinder to be sure that its fluid level is sufficient. 
Bob


> On Aug 23, 2020, at 10:16 PM, dave <dave at ranteer.com> wrote:
> 
> The brake and clutch use the same box, the same container of fluid.
>  
> If the master is full of fluid but there is air in the brake lines (they are sealed but need to be bled), will this affect the clutch?
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200824/8c1fcf76/attachment.htm>


More information about the Mgs mailing list