[Mgs] Shims

[i erbs]

It mstters so the rotor and hub fit properly on the spindle

Ira Erbs
Portland, OR
typos and artifacts are the fault of my phone

On Mon, Sep 2, 2019, 1:28 AM PaulHunt73 via Mgs <mgs at autox.team.net> wrote:

> No experience with a Sprite but why does it matter?  Each piston comes out
> as far as it needs to to press the pad against the disc.  After that they
> both press on the disc with equal and opposite force.  As long as the disc
> isn't rubbing on the caliper I can't see the problem.  It's not a Jaguar,
> Ferrari or Maserati where such things might be desirable.
>
> PaulH.
>
> ----- Original Message -----
>
>    Ira, I have always used the measure-shim-measure method. The goal is of
> course, to center the rotor on the caliper.
>
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>
> Unsubscribe: http://autox.team.net/mailman/options/mgs/eyera3000@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20190902/382f3a6c/attachment.html>