[Mgs] MGA 1500

Alan Kellogg aekell at aol.com
Mon Oct 28 13:12:03 MDT 2019


MGA workshop manual section S.6.  If you don't have one you can find one at MGA guru.  You have to remove the rear splah panel to access the bolts between it and the bumper.  If the car is very complete and is trimmed behind the seats you will have to remove the trim to access one last bolt that is installed from the inside.
Alan


-----Original Message-----
From: dave via Mgs <mgs at autox.team.net>
To: mgs <mgs at autox.team.net>
Sent: Mon, Oct 28, 2019 2:29 pm
Subject: Re: [Mgs] MGA 1500

Does anyone have a picture of an mga with the rear wing removed?  I'm trying to figure out how to get that off


_______________________________________________

Mgs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/mgs/aekell@aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20191028/95a5c6b3/attachment.htm>


More information about the Mgs mailing list