[Mgs] bad clutch or?

[dave]

Picked it up today – when you start it in gear, it starts moving.  Accelerate and it goes, and if you put in the clutch, it takes most of the pressure off but it still creeps.

 

Am thinking  that I’ll bleed the clutch slave cylinder.

 

After that I’m thinking I need to replace the clutch . . .

 

From: PaulHunt73 <paulhunt73 at virginmedia.com> 
Sent: Monday, May 20, 2019 2:18 AM
To: dave <dave at ranteer.com>
Cc: mgs at autox.team.net
Subject: Re: [Mgs] bad clutch or?

 

Agree, it would be like the clutch was fully engaged.  Most likely hydraulics as said, or possibly pilot bearing or friction plate binding.

 

PaulH.

----- Original Message ----- 

I’d check hydraulics first. If it was stuck I think you’d be doing more than creeping.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20190520/73fe39c0/attachment.html>