[Mgs] Differential drain plug tool

[Barney Gaylord]

More than one way to skin a cat.  I got a 
standard 3/8 to 1/2 drive adapter for $1 from a 
cheap tool vendor.  Grrind the output end to a 
little taper, and it's a perfect fit.
http://mgaguru.com/mgtech/tools/pics/drain_plug_wrench2.jpg
http://mgaguru.com/mgtech/tools/ts204.htm


At 11:47 AM 5/5/2019, John DiFede via Mgs wrote:
>I found a simple tool to remove the differential 
>drain/ fill plug.  I purchased a 7/16” x 
>7/16” x2” square key shaft at my hardware 
>store.  Cost was $2.69  and any good hardware 
>store should have it in stock.  Look in the area 
>where they stock specialty hardware.  John Difede 73 MGB ....