[Mgs] Remove the oil cooler

[Charley Robinson]

No!  There's a short bypass hose that must be installed in lieu of the 
oil cooler.  It goes from the oil outlet on the block to the oil filter 
adapter.

CR

On 6/8/2019 5:08 PM, Joe Powers via Mgs wrote:
>
> Greetings,
>
> My MGA has a B engine with oil cooler fitted.  I’d like to remove it.
>
> Can I just cap the fittings at the oil filter and the block?
>
> Is the cap ½ inch BSP? Are there two types of cap with different ways 
> to seal?
>
> Thanks for any help,  Joe
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for 
> Windows 10
>
>
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>
> Unsubscribe: http://autox.team.net/mailman/options/mgs/charley38@twc.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20190608/ebcd2cf7/attachment.html>