[Mgs] PCV question

[Max Heim]

I think your problem is that the valve cover pipe does not run through a PCV valve. A pre-67 doesn’t have a pipe from the valve cover. I would try running a Y-junction, bringing both hoses together before running into the PCV, to simulate the early configuration.

--
Max Heim
mvheim at sonic.net



> On Jun 3, 2019, at 3:09 PM, dannyvarnado--- via Mgs <mgs at autox.team.net> wrote:
> 
> Hi all,
> I have a ’74 MBG engine with a ’64 through ’67 PCV valve on the manifold and connected to the front cover breather pipe.  I have a hose running from the valve cover pipe to the air cleaner.
> Seems to work fine for daily around town driving.  My problem occurs when traveling at 65 mph sustained speed for about 100 miles. 
> The problem is I blow out about half a quart of oil from somewhere mid-engine or back on the passenger side.  I can’t find any obvious place that the oil is coming from but it seems to be concentrated near the starter.
> Any suggestions?
> Thanks,
> Danny
>  
> _______________________________________________
> 
> Mgs at autox.team.net <mailto:Mgs at autox.team.net>
> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs <http://www.team.net/pipermail/mgs> http://autox.team.net/archive <http://autox.team.net/archive>
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net <http://autox.team.net/mailman/options/mgs/mvheim@sonic.net>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20190603/9813658a/attachment.html>