[Mgs] Spin on oil filter

Charley Robinson Charley38 at twc.com
Sun Feb 3 05:38:18 MST 2019

Moss #435-335, Seal, Filter Head to Block.  You'll need the copper 
washer for the bolt too.   I had to dig the old one out of the groove  
with an ice pick.  Tip: Don't over tighten the bolt.  You can crack the 
filter head easily.


On 2/2/2019 7:49 PM, Thomas Gunderson via Mgs wrote:
> My filter mount seems to be leaking. I have read there is an o ring between the block and the filter mount. I can not find a part number. Can anyone help me?
> Sent from my iPhone X
> _______________________________________________
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/pipermail/mgs
> Unsubscribe: http://autox.team.net/mailman/options/mgs/charley38@twc.com

More information about the Mgs mailing list