[Mgs] shaved head

[John DiFede]

I would calculate what your compression ratio will be using the head. If the compression is ok using pump gas, I would use the head.  Also check clearance between valves and piston heads. If no clearance issues I would use the head. 

Sent from my iPhone

> On Feb 21, 2018, at 5:16 PM, James Schulte via Mgs <mgs at autox.team.net> wrote:
> 
> At what point is it useless to use a shaved head. Mine is .050 and It was suggested to use a Payen gasket as it tends to be thicker. When is the return not worth the means.
> Jim
> 
> 
> 
> Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/difejo1@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20180222/270d4047/attachment.html>