[Mgs] clutch/trans question

[Charley & Peggy Robinson]

Any way you look at it, the engine/trans has to come out of the car. :-(

CR


On 6/23/2017 8:10 AM, PaulHunt73 via Mgs wrote:
> If the piston has pushed out of the end of the cylinder then yes it's 
> more than like the release bearing has failed.
>
> PaulH.
>
> ----- Original Message -----
> On my clutch squealing question…  the clutch slave just pushed out on 
> me. I assume resistance from the clutch arm held the slave piston into 
> the cylinder and this is further evidence the throwout bearing likely 
> failed…
>
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/ccrobins@ktc.com
>