[Mgs] 1967 MGB-GT Master Cylinders

[Hans Duinhoven]

I’ve replaced my clutch MC some years ago.

The original metal type is NLA, so I ended up with a plastic reservoir type called V8 type…

It’s the same fit, so no problems with that.

 

Cheers,

Hans

 

Van: Mgs [mailto:mgs-bounces at autox.team.net] Namens David F. Darby via Mgs
Verzonden: vrijdag 1 december 2017 4:00
Aan: mgs at autox.team.net
Onderwerp: Re: [Mgs] 1967 MGB-GT Master Cylinders

 

Gentlemen,

 

Thanks for all the good advice. The rubber plug in the bulkhead was hiding behind some insulation that my PO had installed years ago. I got everything loose, except the lower mounting bolts. I hope I can finish it up tomorrow.

 

Best,

 

David



---
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20171202/133c05a5/attachment.html>