[Mgs] Question on MGB Light Switches
dcouncill at karamursel.org
Tue Nov 15 08:56:28 MST 2016
These turn signal switch units should be readily available new from Moss Motors and other distributers. I replaced mine at one point several years ago in my 71 BGT (most parts now in my 72B).
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29081 - part number 27
Also, to be sure, test the switch while the cowl is still off to insure the high beam part is working and not partially obstructed by the cowl.
From: Mgs [mailto:mgs-bounces at autox.team.net] On Behalf Of S. Carr via Mgs
Sent: Monday, November 14, 2016 7:47 PM
To: mgs at autox.team.net
Subject: Re: [Mgs] Question on MGB Light Switches
I hope somebody comes up with the answer to this, as I have exactly the same problem on our ‘71 B/GT.
After removing the steering column cowl (and putting it back together without breaking the plastic where the screws go is even harder than removal—good thing we had another one in the spares bin!) I noticed that the contact that apparently completes the forward-for-high-beam circuit was no longer there—apparently burned away. So I raided our spares bin for a used stalk—from another year, as it has icons on it that the one in the car doesn’t, but the plug and all the wire colors matched and the “missing” contact was there—and plugged it in while things were still apart. Still no high beams (though, like Jack, I can flash them by pulling the stalk backward), so I put everything back together with the original stalk, and try not to drive the car at night....
Help us both!
‘71 B/GT in PA
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Mgs