[Mgs] MGTD misfiring carbs

W. David Houser mgs4dave at tampabay.rr.com
Sun May 29 06:59:01 MDT 2016


Listers,
Below is a link to a video I put up on Youtube showing how my TD engine is running after just replacing the jet assembly gaskets and the float bowl to carb body grommets on each carb. The carbs are MGA 1.5”. The car has been modified to MKII specs. The thing is it was running great without the misfire before I changed the seals that were leaking.
I centered the jets twice, got a sharp click when dropped, floats getting gas, no stuck needles. I did not change the jets or needles that were on the car and as I say was running well.
Seems like it’s running a bit lean when you give the gas. The jets are down 16 flats from the top, 2 full turns plus 4 additional flats. 
Any and all thoughts appreciated.
Cheers,
Dave Houser

https://youtu.be/HOzMP5CUDuk <https://youtu.be/HOzMP5CUDuk>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20160529/0c271e5f/attachment.html>


More information about the Mgs mailing list