[Mgs] Hazard flasher question

[dave willner]

Doing some minor things this morning, needed to fix the Hazards and went to replace the hazards flasher. Several diagrams for 70 indicate a LGB lead, a LGN lead, and a N lead. I cannot find a N (Brown) lead anywhere in back of the console, except for a double female bullet connector? The old flasher had 3 posts W1, C1, and C2, and the entire post on C2 was missing. The new flasher has three posts, P, L, and X which corresponds to the diagram. I cleaned up the 2 and worked ok, except the only lights that flashed were the front and rear drivers side. Is there a simple solution to get both sides going by anyone who’s been there done that so I can move on? Appreciate it

Dave Willner
Stroudsburg, PA
59 TR3A BRG
70 MGB BRG
70 BSA 441 VS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20151017/cbacc596/attachment.html>