[Mgs] oil pressure sender

[riverside at southslope.net]

MGA had a mechanical (direct pressure) combination oil/ water temp gauge. An oil flex line connected between the engine and a fitting , a hard line connected from the fitting to the gauge (screw on).
If you are looking for a single oil gauge you may have to go with aftermarket.  If you need an electrical sending unit go MGB.
Moss Motors is good source.

Ron

From: Clayton Kirkwood via Mgs 
Sent: Tuesday, June 16, 2015 6:22 PM
To: mgs at autox.team.net 
Subject: [Mgs] oil pressure sender

Does anybody know if there are mga oil pressure sender and screw-on on the back of the gauge sources? If I can source one, I finally have a solution for my 59 Landrover. 

 

TIA,

 

Clayton



--------------------------------------------------------------------------------
_______________________________________________

Mgs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/mgs/riverside@southslope.net



--------------------------------------------------------------------------------

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5961 / Virus Database: 4365/10034 - Release Date: 06/17/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20150616/cc4885dd/attachment.html>