[Mgs] Fuel Issue

Richard Ewald richard.ewald at gmail.com
Mon Jan 28 13:02:23 MST 2013


Check the piston in rear rear carb for free movement. Of that is OK, check the
needle and seat.

Sent from my iPhone

On Jan 28, 2013, at 11:40, "Bill Snyder" <wtsnyder at bellsouth.net> wrote:

> I have a '66B that I cranked after a 6-month hiatus a few days ago. It
> started but ran very rough as if on 3 cylinders. I put in fresh plugs,
> checked the dizzy cap and cleaned it contacts as well as the rotor. There
> was no change. After re-inspecting the plugs, it appears that the 4th
> cylinder was not firing, but the plug was not gas or oil fouled. Laying the
> plug out on the block, attached to the plug wire and cranking showed the
> plug firing properly, so I am apparently getting no fuel to that cylinder.
> Can anyone run me through the procedure to check on that issue? It has
> Petronix ignition and has been converted to negative ground. Thanks in
> advance.
>
> Bill Snyder
>
> Waynesville, NC
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/mgs/richard.ewald@gmail.com


More information about the Mgs mailing list