[Mgs] Odd wrenches

Tue Nov 13 06:17:59 MST 2012

I have a set of open-end ignition wrenches made by Giller; don't 
remember how I came by them.  There are a couple of interesting sizes: 
1/4 x 15/64  & 11/32 x 9/32.  Haven't used them in years.

CR
On 11/11/2012 10:31 AM, " Just Brits " Shop wrote:
> Glenn & guys;

> I seem to recall Snap-On selling a three (3) piece SET of "Ignition 
> Wrenches" MANY, MANY years ago. However Glenn & IIRC, the largest was 
> 7/16" & 3/8" then 3/8" & 1/4" them 1/4" & 3/16". All three (3) were of 
> thin-wall construction with both 'heads' at 90 degrees to the shaft. 
> As usual, Snap-On would & did sell the wrenches separately <VBG> ! ! ! 
> Sorry Glenn, but I do NOT re-call a 4th wrench with would have been 
> 7/16" & 1/2" or the "set" starting there and going down in size (I am 
> next to positive on this - LOL) ! ! ! If I can find my 7/16" & 3/8" 
> wrench, I get ya'll some pics and measurements. 'Big' one is about 
> three.five" ( 3 1/2") long. Ed Please visit MY site at: 
> www.justbrits.com PS: <lite bulb going off> Eureka, Sears had a 
> roll-up kit in red plastic & IIRC, wrenches were Craftsmen. 
> _______________________________________________ Mgs at autox.team.net 
> Donate: http://www.team.net/donate.html Suggested annual donation 
> $12.75 Archive: http://www.team.net/archive Forums: 
> http://www.team.net/forums Unsubscribe: 
> http://autox.team.net/mailman/options/mgs/ccrobins@ktc.com 