[Mgs] Aluminum bonding agent

[Richard Ewald]

JB weld leaps to mind, but I think you might have a huge problem trying to
use anything to bond a filler neck to a tank.  The filler neck will act as
a long lever, and any movement at the end of filler neck will quite likely
crack any bonding agent at the lower end.
Good luck
Rick

On Wed, Mar 21, 2012 at 12:49 PM, davewillner <davewillner at pa.net> wrote:

> I need some advice on the availability of a very high strength aluminum
> bonding agent, that can be used on a gas tank, to bond the filler neck
> (long
> story...). Does anyone know of an industrial bonding product that is
> somewhat
> easy to use that will make a strong, permanent bonding seal?  Thanks
>
> Dave Willner
> Stroudsburg PA
> 59 TR3A
> 70 MGB
> 70 BSA 441 VS
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/mgs/richard.ewald@gmail.com