[Mgs] mgb engine mounting

[Paul Hunt]

More than 1/8" thick, mine measures 0.175".  It goes behind the engine mount 
bracket (not between the mount and the bracket which would upset the 
alignment), and the tab hits the chassis bracket if the engine moves 
forward, not the rubber - http://www.mgb-stuff.org.uk/images/mount12.jpg

----- Original Message ----- 
>   ... Recoil bracket is, I think,
> a plate approx 1/8 inch thick that fits behind the rubber mount block and 
> has
> a tab that is supposed to hook on the rubber when the engine tries to leap
> forward.