[Mgs] ] mg engine

[WSpohn4 at aol.com]

Correction - flywheels and clutches are usually marked.  If they mark  the 
crank as well, it is probably because they are used to balancing V8s where  
it does indeed matter.
 
Bill
 
In a message dated 20/06/2010 12:37:29 P.M. Pacific Daylight Time,  
mgbob at juno.com writes:

The  machine shops I have used told me that the cranks and flywheels  are
balanced separately.  If that's so, then it would seem that  flywheels 
could be
swapped.
But--since cranks and flywheels are  usually marked, some must believe that
crank and flywheel should be kept  together.
I would keep the originals together unless you knew of  some strong reason 
to
exchange them.