[Mgs] [Members2] mg engine

[Dan DiBiase]

Malcolm, the rubber mount attaches to the transmission with 2 bolts each, and has a central screw that attaches the
mount to the cross member. See here - http://i24.photobucket.com/albums/c30/ddibiase/1976%20MGB%20Engine%20Work/P7060032.jpg
So, the rubber mount stays attached to the trans when you pull the crossmember away.

 Dan D
Central NJ USA
'76 MGB Tourer
'65 MGB Tourer (Project)
NAMGBR #5-2328 
http://dans65b.blogspot.com/
http://dans76b.blogspot.com/
http://dansautoblog.blogspot.com/
http://dans-life-blog.blogspot.com/
twitter: dandibiase





________________________________
From: Malcolm Jeffcock <msjeffcock at eastlink.ca>
To: mgs at autox.team.net; members2 at batans.ca
Sent: Sun, June 13, 2010 6:23:34 AM
Subject: Re: [Mgs] [Members2] mg engine

Thanks to everyone who replied. I have had a ;ook and can see the bolts "inside". Question though, are the rubbers that the bolts appear to pass through attached to the cross memberin any way? I see from the photos that Dave was kind enough to send me that they are least removeable from the cross member but I am wondering if when these bolts come out will the cross member and rubbers just drop or will the rubber remain attached to the gear box?

Malcol  
_______________________________________________

Mgs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/mgs/d_dibiase@yahoo.com