[Mgs] MGA clutch cylinder

[David Ambrose]

On 12/22/2010 2:28 PM, Tom Gunderson wrote:
> I replaced the rubber parts in my brake and cluch cylinder. I honed the
> cylinders. The brake bleeds and comes uo to preasure fine but the cluch
> plunger wants to stick and will not come up to preasure. Any ideas?
> Tom Gunderson ,1957 ,1500 MGA rst
Did you use Moss kits? My recent experience with their seal kits is 
showing a 60% failure rate.

Cheers,
Dave Ambrose