[Mgs] Engine I.D.

[Paul Osborne]

By chance do you think they have the orig heads ?  if so there is a 
casting number on the top .  this can give you the engine series that 
they were fitted to , from there you can match the years.  it is a 
start.


>I have two engines I'm trying to I.D. the year of. One has three piston
>rings,the other has four. I believe their both early seventies. The number
>plate is missing on both. They were both bored .20, tanked. and shotpiened at
>a local mechine shop and the fellow I got them from didn,t take the plates off
>or write the numbers down before he had it done.
>
>
>                                                            Any help would be
>appreciated
>
>                                                                             
>Steve
>_______________________________________________
>
>Mgs at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: http://autox.team.net/mailman/options/mgs/paul@ece.rochester.edu


-- 
Paul Osborne
University of Rochester
Engineering & Technical Services
Department of Electrical and Computer Engineering
201 Hopeman Bldg River Campus
Rochester, New York 14627
585-275-5226
paul at ece.rochester.edu