[Mgs] 1967 O/D driveshaft

[wspohn4 at aol.com]

Be hard NOT to balance it as you are turning it up on a lathe, Paul, but  
its a fair point.
 
Bill
 
 
In a message dated 12/21/2009 8:22:13 A.M. Pacific Standard Time,  
paul.hunt1 at blueyonder.co.uk writes:

Balanced  ...

----- Original Message ----- 

> Of course you can, but  because the OD trans is shorter, you need to have 
a
> 1 1/8" spacer  block machined up to go between the diff and rear 
driveshaft
> flange.