[Mgs] Brake warning light ON

[chris.kotting at gmail.com]

1)  Open a bleed screw on a brake caliper/cylinder on the opposite end of the car from the leak. 
2)  Have an asisstant push the pedal down <slowly> until the light goes out.  
3)  Close bleed screw.

You have to do the same thing after bleeding the brakes.
-----Original Message-----
Date: Mon, 29 Sep 2008 09:18:40 -0400
From: Paul Osborne <paul at ece.rochester.edu>
Subject: [Mgs] Brake warning light ON
To: mgs at autox.team.net

How do you re center the brake warning switch ?  Had a rear wheel 
leak and the light came on , now can not get it to go out.

paul
-- 
Paul Osborne
University of Rochester
Engineering & Technical Services
Department of Electrical and Computer Engineering
201 Hopeman Bldg River Campus
Rochester, New York 14627
585-275-5226
paul at ece.rochester.edu