[Mgs] Headlight relay's

[Paul Hunt]

Just get bog-standard accessory relays (no apostrophe).  If you can relays
with a change-over contact e.g. http://tinyurl.com/4hhtdp (common (30)
connected to the 12v supply, normally closed contact (87a) to dipped beams,
normally open contact (87) to main beam) then you will only need one relay,
but if they have just a single normally open contact you will need two.  If
you get relay(s) with an integral fuse (or install a main supply in-line fuse)
then make sure you fit individual filament fuses as well, of about 1/4 the
rating of the supply fuse, or you could lose all your headlights in one go.

PaulH.
  ----- Original Message -----


  Anyone have any idea of where to purchase headlight relays from