[Mgs] transmission switches

[Dan DiBiase]

Ed, have you made the modification to the transmission crossmember that allows you to tighten the bolts on the transmission? Basically,
you drill 2 holes through the crossmember to allow you to pass a socket through to the bolts.

 Dan D
Central NJ USA
'76 MGB Tourer - Driver - Engine Surgery In Progress...
'65 MGB Tourer Project - Yep, Still Is.... 
NAMGBR #5-2328 
http://dans65b.blogspot.com/
http://dansautoblog.blogspot.com/
http://mywebpages.comcast.net/dibiase/Working_MG_Gallery.html



----- Original Message ----
From: Ed Woods <fogbro1 at comcast.net>
To: mark.jones at exxonmobil.com
Cc: Mgs at autox.team.net
Sent: Wednesday, June 18, 2008 10:18:08 PM
Subject: Re: [Mgs] transmission switches

Mark,

Thanks for the drawings of the transmission mounting and remote shifter 
assembly.

The step by step removal/replacement instructions for the transmission 
mount/X member were invaluable, especially the part about starting the rear 
transmission bolts before offering up the X member.

Ed Woods 
You are subscribed as d_dibiase at yahoo.com


Mgs at autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive