[Mgs] engine reinstall

[Richard Ewald]

Just goes to show that Ed is brighter than I am.  I probably did a 50/50
split on which way I pulled them.
Got to where I could put a B motor on the floor in under an hour.  Spitfires
were faster, Sprigets were slower.


On Sat, Dec 20, 2008 at 11:53 AM, Ed's Shop <shop at justbrits.com> wrote:

> <<Over the years I have done this job a bunch of times on both my own and
> customer's cars.>>
>
> Paul, I'm with Rick here.  Only I'm sure I've done well over 200 outs/in.
> I made the mistake ONCE in thinking 'just pull the motor alone and put it
> back with tranny in place'!!!  Once was MORE than enough<G>!  This applies
> to Spridgets and even Big Healeys.
>
> Best to tell him to bite the bullit & yank motor then get the tranny out
> and mate up.
>
> Besides, most likely needs u-joints !!! <VBG>
>
> Ed
> Please visit MY site at:                www.justbrits.com
> (Joke Section is BACK !!)
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
>
> You are subscribed as richard.ewald at gmail.com
>
>
> Mgs at autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive