[Mgs] HIF carb jets

[Paul Hunt]

You will need to remove the offending carb and remove its base-plate to 
check the jet is correctly located in the adjusting screw.  Check the jet is 
moving up and down with the mixture screw before refitting.  Unless you have 
recently replaced the O-ring on the base-plate you will need to do so now or 
it will probably leak.

PaulH.

----- Original Message ----- 
> My 72 B has been running very rough since I swapped in a set of hifs. When 
> I
> was adjusting the mixtures I noticed that one of the jets was not moving.