[Mgs] New Harness has arrived

[Paul Hunt]

It should do, the bypass circuit really only comes into play under adverse 
conditions and poor state of tune.  If you have the original solenoid with 
the extra spade you can simply add the wire, or if the solenoid doesn't have 
the spade you can replicate the function with a relay, or if you know what 
you are doing a diode.

The time delay unit and its predecessor (the sequential system that 
interrupted the starter circuit) go back to 74 so it sounds like you have a 
harness for a different market, as I'd expect there to be more differences 
if it were for a US car earlier than that!  If that is the plug is the only 
difference it shouldn't have any knock-on effects.

PaulH.

----- Original Message ----- 
> ... So I hooked up the
> battery and turned the key. It cranked, and in spite of the fact that I
> had not hooked up the choke cable yet (and the lack of ballast bypass)
> it started up!