[Mgs] "B" chocke cable

[1971-red-mgb]

Thank you Rick, I'm going to try that tomorrow.


----- Original Message ----- 
From: "Rick Lindsay" <rolindsay at yahoo.com>
To: "1971-red-mgb" <1971mgb at cox.net>; "MG LIST" <mgs at autox.team.net>
Sent: Friday, December 21, 2007 7:48 PM
Subject: Re: [Mgs] "B" chocke cable


> Yes!  Been tere, done that.
>
> Before you route the cable through the firewall,
> thread a deep socket onto the cable.  It will give you
> enough leverage (and something to grab) to tighten the
> nut nicely.  Once the socket is removed and everything
> is in place and straight, use a mirror and paint a
> glob of fingernail polish or model car paint between
> the nut and the threads to "lock" the nut from
> vibration.
>
> regards,
>
> rick
>
>
> --- 1971-red-mgb <1971mgb at cox.net> wrote:
>
> > has anyone figured out an easy way to install the
> > complete choke cable on the
> > B, I've skinned my hand over and over trying to
> > tighten the nut underneath the
> > dash, maybe get a friend with small hands to do it?
> > _______________________________________________
> > Support Team.Net  http://www.team.net/donate.html
> >
> >
> > You are subscribed as rolindsay at yahoo.com
> >
> >
> > Mgs at autox.team.net
> > http://autox.team.net/mailman/listinfo/mgs
> >
> > http://www.team.net/archive
> >
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.17.5/1191 - Release Date:
12/20/2007 2:14 PM