[Mgs] Mechanical cooling fan

[Dodd, Kelvin]

Paul:

I've got one of the supercharger kit ones coming over this morning to
measure. I've also got some original ones somewhere that came off
Marinas.

I'll get you a measurement.


Kelvin Dodd



> -----Original Message-----
> From: Paul Hunt [mailto:paul.hunt1 at blueyonder.co.uk]
> Sent: Thursday, August 16, 2007 2:11 AM
> To: Dodd, Kelvin; mgs at autox.team.net; MG-MGB at yahoogroups.com
> Subject: Re: [Mgs] Mechanical cooling fan
>
> Thanks Kelvin.  It's actually clearer in the Moss catalogue than the
> Leyland
> Catalogue that a spacer needs to be added to the 3-blade fan when used
> with
> the 18V water pump.  I'll be seeing if I can get hold of one
somewhere,
> but
> whether a breaker will be willing to sell one separate from the fan
and
> pulley remains to be seen.  Getting one the right size will be the
next
> challenge, although I can make a guess that it will be between 2 and 3
cm
> long.
>
> Paul.
>
> ----- Original Message -----
> The pulley was changed at the same time and a spacer was required to
get
> the UK 3 blade fan close enough to the radiator to work properly....